Bandwidth Control - Tenda W3002R User Manual

W3002R
Wireless N300 High Power Router

4.6 Bandwidth Control

To better manage bandwidth allocation and optimize network performance,
use the bandwidth control feature.
Enable Bandwidth Control: Check or uncheck the box to enable or disable the
bandwidth control feature. This option is disabled by default.
IP Address: Enter the same IP or two different IP addresses in both boxes to
specify a single IP address or an IP range to which the current bandwidth control
rule will apply.
Upload/Download: Select to control bandwidth over data upload or download
traffic.
Bandwidth Range: Set a upload/download bandwidth limit on PCs within a
specified IP range. Note that maximum upload/download bandwidth should not
exceed your router's WAN bandwidth limit. (Consult your ISP if you are not
clear.)
Enable: Check/uncheck to enable/disable current entry. When disabled,
corresponding entry will not take effect though existing in fact.
Add to List: Click to add current bandwidth control rule to the rule list.
For a 2M broadband service, you may download and upload data at speeds up to
2Mbps (256KByte/) and 512kbps (64KByte/s) in theory respectively.
25