Tenda W3002R User Manual page 23

W3002R
Wireless N300 High Power Router
Address Mode: Select "Dynamic" if you don't get any IP info from your ISP,
otherwise select "Static". Consult your ISP if you are not clear.
IP Address: Enter the IP address provided by your ISP. Consult your ISP if you
are not clear.
Subnet mask: Enter the subnet mask provided by your ISP.
Gateway: Enter the WAN Gateway provided by your ISP. Consult your ISP if you
are not clear.
L2TP
Select L2TP (Layer 2 Tunneling Protocol) if your ISP requires. The L2TP allow
you connect to L2TP VPN server from ISP or headquarter. For example：A
corporate branch and headquarter can use this connection type to implement
mutual and secure access to each other's resources.
Internet connection Type: Displays the current Internet connection type.
L2TP Server Address: Enter the IP address or domain name of a L2TP server.
User Name: Enter the L2TP User Name provided by your ISP.
Password: Enter your Password.
MTU: Maximum Transmission Unit. DO NOT change it from the factory default of
1452 unless necessary..
Address Mode: Select "Dynamic" if you don't get any IP info from your ISP,
otherwise select "Static". Consult your ISP if you are not clear.
IP Address: Enter the IP address provided by your ISP. Consult your ISP if you
are not clear.
Subnet mask: Enter the subnet mask provided by your ISP.
Gateway: Enter the WAN Gateway provided by your ISP. Consult your ISP if you
are not clear.
21