Tenda W3002R User Manual page 48

W3002R
Wireless N300 High Power Router
Example: You want to share some large files with your friends who are not in
your LAN; however it is not convenient to transfer such large files across network.
Then, you can set up your own PC as a FTP server and use the Port Range
Forwarding feature to let your friends access these files. Assuming that the
static IP address of the FTP server (Namely, your PC) is 192.168.0.10, you want
your friends to access this FTP server on the default port of 21 using the TCP
protocol, then do as follows:
1． Enter 21 in both Start Port and End Port fields or select FTP from
"Well-known Service Port" and an entry ID, 21 will be automatically populated to
corresponding fields of the selected entry.
2． Enter 192.168.0.10 in the private field, select "TCP" and then select "Enable'.
3． Save your settings.
Now, your friends only need to enter ftp://xxx.xxx.xxx.xxx:21 in their
browsers to access your FTP server. xxx.xxx.xxx.xxx is the router's WAN IP
address. Assuming it is 172.16.102.89, then your friends need to enter
"ftp://172.16.102.89: 21" in their browsers.
Note:
If you include port 80 on this section, you must set the port for
remote (web-based) management to a different number than 80, such
as 8080, otherwise the virtual server feature may not take effect.
46