Fiber: Led And Eled Transmitters - GE T35 Instruction Manual

3 HARDWARE
Table 3–4: CHANNEL COMMUNICATION OPTIONS (Sheet 2 of 2)
MODULE SPECIFICATION
7N Channel 1: RS422, channel 2: 1300 nm, single-mode, ELED
7P Channel 1: RS422, channel 2: 1300 nm, single-mode, laser
7Q Channel 1: G.703, channel 2: 1300 nm, single-mode, laser
7R G.703, 1 channel
7S G.703, 2 channels
7T RS422, 1 channel
7V RS422, 2 channels, 2 clock inputs
7W RS422, 2 channels
OBSERVING ANY FIBER TRANSMITTER OUTPUT MAY CAUSE INJURY TO THE EYE.
The following figure shows the configuration for the 7A, 7B, 7C, 7H, 7I, and 7J fiber-only modules.
GE Multilin
Figure 3–31: LED AND ELED FIBER MODULES
T35 Transformer Protection System
3.3 DIRECT INPUT/OUTPUT COMMUNICATIONS

3.3.2 FIBER: LED AND ELED TRANSMITTERS

3
3-29