Faceplate Interface; Faceplate - GE T35 Instruction Manual

4.3 FACEPLATE INTERFACE

4.3FACEPLATE INTERFACE
a) ENHANCED FACEPLATE
The front panel interface is one of two supported interfaces, the other interface being EnerVista UR Setup software. The
front panel interface consists of LED panels, an RS232 port, keypad, LCD display, control pushbuttons, and optional user-
programmable pushbuttons.
The faceplate is hinged to allow easy access to the removable modules.
Five column LED indicator panel
4
b) STANDARD FACEPLATE
The front panel interface is one of two supported interfaces, the other interface being EnerVista UR Setup software. The
front panel interface consists of LED panels, an RS232 port, keypad, LCD display, control pushbuttons, and optional user-
programmable pushbuttons.
The faceplate is hinged to allow easy access to the removable modules. There is also a removable dust cover that fits over
the faceplate which must be removed in order to access the keypad panel. The following figure shows the horizontal
arrangement of the faceplate panels.
LED panel 1
Front panel
RS232 port
Small user-programmable
(control) pushbuttons 1 to 7
Figure 4–16: UR-SERIES STANDARD HORIZONTAL FACEPLATE PANELS
4-14
User-programmable pushbuttons 1 to 16
Figure 4–15: UR-SERIES ENHANCED FACEPLATE
LED panel 2 LED panel 3
User-programmable
pushbuttons 1 to 12
T35 Transformer Protection System
4 HUMAN INTERFACES

4.3.1 FACEPLATE

Display
Keypad
Front panel
RS232 port
842810A1.CDR
Display
Keypad
827801A7.CDR
GE Multilin