Operation And Test; Self-Diagnostic Function; Monitoring And Debugging - Mitsubishi Electric FX5U User Manual

■Serial connection
COM port
(COM1)
RS-232 cable
1)
(FX-232CAB-1)
GX Works3 settings
No. Item
1) PC side I/F
2) PLC side I/F
Other Station Setting
7.2

Operation and Test

Self-diagnostic function

When the power of the CPU module is turned on, the self-diagnostic function to check for errors starts in the module. The
CPU module boots when there is no error with the hardware, parameters and program.
When there are no errors, the module enters the RUN status (the P.RUN LED turns on) in response to the RUN instruction
(Page 114 Running, Stopping, and Resetting). If any error is detected, the "ERR" LED flashes or lights up.

Monitoring and debugging

The ON/OFF status of PLC's devices, current values or set values can be monitored or changed by using engineering tools.
For details, refer to GX Works3 Operating Manual.
FX5-232ADP
2)
Selection item Internal setting
Serial/USB RS-232C
COM Port
Transmission Speed
PLC Module PLC Mode
No Specification Check at Communication
Time
Retry Times
FX5-232-BD
COM port
(COM1)
RS-232 cable
1)
(FX-232CAB-1)
Input value

COM1
115.2Kbps
FX5CPU
30 seconds
0 times
2)
7 OPERATION ADJUSTMENT
7.2 Operation and Test
7
113