Input Wiring; Dc Input (Sink And Source Input Type) - Mitsubishi Electric FX5U User Manual

6.5

Input Wiring

The input wiring of the CPU module and I/O modules is explained below.
24 V DC input (Sink and source input type)
For input specifications of the CPU module, refer to Page 19 Input Specifications.
For input specifications of the I/O modules, refer to Page 135 Input specifications.
Sink and source input
■Differences between the sink input circuit and the source input circuit
• Sink input [-common]
Sink input means a DC input signal with current-flow from the input
(X) terminal.
When a device such as a transistor output type sensor is
connected, NPN open collector transistor output can be used.
L
N
24V
0 V
S/S
X
■Switching between sink/source inputs
To switch the input type to sink or source input, wire the [S/S] terminal to the [0V] or [24V] terminal.
• Sink input: Connect the [24V] terminal and [S/S] terminal. (Page 87 Sink input [AC power supply type])
• Source input: Connect the [0V] terminal and [S/S] terminal. (Page 88 Source input [AC power supply type])
All inputs (X) of the CPU module can be set to either sink input or source input by selection.
• Source input [+common]
Source input means a DC input signal with current-flow into the
input (X) terminal.
When a device such as a transistor output type sensor is
connected, PNP open collector transistor output can be used.
L
N
24V
0V
S/S
X
6
6 WIRING
83
6.5 Input Wiring