Multi-Function Switch/Button S1 - KEB combicontrol PCC C5 Instruction Manual

COMBICONTROL
4.4

Multi-function switch/button S1

The multi function switch/button is constructed as follows:
The button S1 is assigned with the following functions
Activity
Stop --> Run
Run --> Stop
Stop --> Clear and hold (> 3 s)
until LD 2 lights
Stop --> Clear and hold (> 10 s)
until LD 1+2 light
Stop --> Clear 3 x within 2 s
GB - 16
clear (button)
stop/reset
run (switch)
Function
Program is started
Programm is stopped, all variables are resetted (reset
warm)
After releasing the switch all retain variables are resetted
(reset cold)
All variables and the boot project are cleared (reset
origin) after releasing the button. If a memory card is
plugged-in, all files are copied from the card into the in-
ternal flash memory. Existing files (e.g. the boot project)
are overwritten.
All files of the internal flash are copied onto a plugged-in
memory card. Existing files are overwritten. LD2 lights
up briefly.