PTP 54600 reference information
PTP 54600 radio system specifications
Table 4-41
Table 4-41 PTP 54600 RF specifications
Radio Technology
RF Band
Channel Selection
Dynamic Frequency Control
Channel size
Manual Power Control
Receiver Noise Figure
Integrated Antenna
Type/Gain
External Antenna Gain
Antenna Beamwidth
Max Path Loss (5 MHz
channel, integrated antenna)
Duplex Scheme
Range
4-58
contains radio system specifications for the PTP 54600.
Specification
5.470-5.725 GHz
By dynamic frequency control and manual intervention
Automatic detection on start-up and continual adaptation
to avoid interference.
Initial capture 10-15 sec. Out of service on interference
100 ms.
5, 10, 15 and 30 MHz
Maximum power can be controlled lower than the power
limits shown above in order to control interference to
other users of the band.
Typically 6 dB
Integrated flat plate antenna; 23dBi
Depends on feeder losses, see
connectorized units
8 Degrees
169 dB
Symmetric fixed, asymmetric fixed or adaptive TDD
125 miles (200km) optical Line-of-Sight
6 miles (10km) non-Line-of-Sight
UNDER DEVELOPMENT
Chapter 4 Reference information
Regulatory issues with
8-10
on page
.
phn-0896_009v003
Feb 2010