User Guide: PTP 600 Series
PTP 45600 radio system specifications
Table 4-20
Table 4-20 PTP 45600 RF specifications
Radio Technology
RF Band
Channel Selection
Dynamic Frequency Control
Channel size
Manual Power Control
Receiver Noise Figure
Antenna Type
Antenna Gain
Antenna Beamwidth
Max Path Loss (5 MHz
channel)
Duplex Scheme
Range
Over-the-Air Encryption
phn-0896_009v003
Feb 2010
contains radio system specifications for the PTP 45600.
Specification
4.400-4.600 GHz
Manual selection.
By intelligent Dynamic Frequency Selection (i-DFS) or
manual intervention; automatic selection on start-up and
continual adaptation to avoid interference.
5, 10, 15, 20 and 30 MHz
Maximum power can be controlled lower than the power
limits shown above in order to control interference to
other users of the band.
Typically 5 dB
Integrated flat plate antenna
21.5 dBi typical
11 Degrees
157 dB
Symmetric fixed, asymmetric fixed or adaptive TDD
125 miles (200km) optical Line-of-Sight
6 miles (10km) non-Line-of-Sight
Proprietary scrambling mechanism.
UNDER DEVELOPMENT
PTP 45600 reference information
4-27