PTP 54600 reference information
PTP 54600 available spectrum settings
The available spectrum settings for the PTP 54600 are illustrated in this section.
Adjustment of the lower centre frequency allows the operator to slide the available
frequency settings up and down the 5.4 GHz band in steps of 2 MHz.
In the 30 MHz channel bandwidth
10 MHz channel raster. In the 15 MHz
(Figure
4-21) channel bandwidths, the PTP 54600 variant operates on a 6 MHz
channel raster. The channel raster is set to even centre frequencies. The PTP 54600
product variant does not apply any band edge power reduction.
NOTE
These tables contain data for one typical region code. The specified channel
centre frequencies may not be available in other region codes.
Figure 4-18 PTP 54600 available spectrum in 30 MHz channel bandwidth
4-60
(Figure
(Figure
UNDER DEVELOPMENT
Chapter 4 Reference information
4-18), the PTP 54600 variant operates on a
4-19), 10 MHz
(Figure
4-20) and 5 MHz
phn-0896_009v003
Feb 2010