Canon WUX500ST User Manual page 98

Menu Description
Submenu
Left / Right /
Top / Bottom
Width
Start
position
Side
Adjust unwanted colors or discrepancies between colors in the blending
area.
Color blending
adjustment
Select the direction of the blending area to adjust.
Specify the width between the start and end markers.
Moves the position of the start marker.
• Large blending areas may cover input signal dialog boxes and
other interface elements. In this case, momentarily set edge
blending to [Off] and check the display.
• Although the starting marker is normally aligned with the image
edge, it can also be aligned toward the center of the image. In
this case, the black blending area will lie outside of the starting
marker.
Submenu
Off Do not adjust colors of blended images.
Adjust unwanted colors or discrepancies between
colors in the blending area.
Option
Adjust
White
Red/Green/
Blue
Function
Function
Function
Simultaneously adjust red, green, and
blue to correct unwanted colors or
discrepancies in the blending area.
Individually adjust red, green, and
blue to correct unwanted colors or
discrepancies in the blending area.
98