Controlling The Projector From A Computer - Canon WUX500ST User Manual

Controlling the Projector from a Computer

The projector can be controlled from a computer over a wired or wireless network
connection.
1
Turn on the computer and projector.
2
Launch a web browser, enter "http://(projector IP address)" in the
address bar, and press the Enter key.
The projector web screen appears.
The projector's own default IP address is 192.168.254.254 for wired connections and
192.168.253.254 for wireless connections. If DHCP settings are used, ask the network
administrator for the projector IP address. It is possible to check the IP address from the
projector menu.
3
Click [Projector control] on the web screen.
The password input window appears.
4
Enter the user name and password on the password input window, then
click [OK].
The factory default user name is "root" and the password is "system".
The projector control screen appears.
The projector can be controlled from this screen.
Item
Projector name
Comment
Refresh
Power
Input
Aspect
Image mode
Blank
Mute
Auto PC
Split screen
The name of the connected projector is displayed. (P144)
Shows notes, such as where the projector is installed. (P144)
Refreshes the displayed contents with the most recent information.
Turns projector power on or off.
Select an input signal and click [Apply] to change to that input signal.
(P50)
Select an aspect and click [Apply] to change to that aspect. (P56)
Select an image mode and click [Apply] to change to that image mode.
(P61)
Switches the blank setting on or off. (P63)
Switches the mute setting on or off. (P34)
Click [Apply] to perform Auto PC adjustment. (P52)
Select the setting for split-screen mode and click [Apply] to switch to
split-screen projection. (P85, P161)
149
Menu Description
Explanation