Menu Position; Menu Display Time - Canon WUX500ST User Manual

Menu position

Reposition menu display.
Use the [ ] / [ ] / [ ] / [ ] buttons to move the menu to the desired position.
Guide
Shows the guide screen.
Option
Off Hides the guide screen.
On Shows the guide screen.
The guide screen is shown at the following cases.
• No input signal is detected.
• An invalid button is pressed in [BLANK], [FREEZE], or [D.ZOOM] mode. (P33)
• When positional lock (P94) is set to [On] and buttons locked by this feature are
pressed.
• When the projector is already on and the POWER button is pressed.
Show input status
Specify whether signal status is shown when there is no signal or when you are completing
signal settings.
Option
Off The input status is not displayed.
On The input status is displayed.
Overheat warning display
Specify whether the icon warning of high temperature (
temperature is high and the projector may overheat.
Option
Off Disable high temperature warning icon display.
On Enable high temperature warning icon display.

Menu display time

Extend menu display from the standard 10 or 30 seconds to 3 minutes.
Option
Normal The menu is displayed for 10 or 30 seconds.
Extended The menu is displayed for 3 minutes.
The following display times are also changed.
Item
MENU screen
- Input (P50)
- Keystone adjustment (P58)
- Keystone reset (P60)
- D.image shift adjustment (P56)
- D.image shift reset
- Aspect (P56)
- Image mode (P61)
- Volume adjustment (P29, P34)
Function
Function
) is shown when the internal
Function
Function
[Normal] [Extended]
30 seconds 3 minutes
10 seconds 3 minutes
101
Menu Description