Step 3 Adjust The Image - Canon WUX500ST User Manual

Step 3 Adjust the Image

Setting the Display Resolution of the Computer
Based on the maximum resolution of the projector, set the display resolution of the
computer to the resolution closest to the output signal resolution of the projector.
(P184)
Maximum resolution
1920 X 1200 dots
■ Windows 10
1
Open the [Control Panel] from the start menu, then select [Appearance
and Personalization] - [Adjust screen resolution] in the [Control Panel
Home].
2
Click the [Resolution] tab, and move the slider to select the resolution
closest to the maximum output signal resolution of the projector.
3
Click the [OK] button.
■ Windows 8.1 / Windows 8
1
Move the cursor toward the upper or lower right corner to access the
menu.
2
Click [Settings], and then click [Control Panel].
3
From [Control Panel Home] - [Appearance and Personalization], select
[Adjust screen resolution].
4
Click the [Resolution] tab, and move the slider to select the resolution
closest to the maximum output signal resolution of the projector.
5
Click the [OK] button.
■ Windows 7
1
Open the [Control Panel] from the start menu, then select [Appearance
and Personalization] - [Adjust screen resolution].
2
Click the [Resolution] tab, and move the slider to select the resolution
closest to the maximum output signal resolution of the projector.
3
Click the [OK] button.
Projection Procedure
51