Canon WUX500ST User Manual page 127

Menu
Enable or disable wireless DHCP on the projector.
Off
DHCP
On
Configure the projector's wireless TCP/IP settings.
• Cannot be configured when [DHCP] is [On].
• If an invalid value is entered, the message "Invalid entry" appears. If
TCP/IP settings
The following network settings are initialized.
Settings configured from the projector menu
• Network settings lock (P121)
• Network password setting (P121)
• Register network password (P121)
• Network standby settings (P122)
• Network (wired/wireless) (P122)
• Detailed settings (wireless) (P125)
Settings configured from the web screen
Network setting
• [Password] (P137)
initialization
• [Wireless] (P139)
• [NMPJ Password] (P140)
• [Mail] (P141)
• [Mail auth] (P142)
• [Projector info.] (P144)
Submenu
Disables the DHCP function. TCP/IP settings can be
configured.
Enables the DHCP function. Searches the DHCP
server. It will no longer be possible to enter TCP/IP
settings (IP address, subnet mask, and gateway
address), because the IP address is acquired from the
DHCP server.
this occurs, enter a valid value.
- IP address (wireless) (P125)
- Gateway address (wireless) (P125)
- DHCP (wireless) (P127)
- Subnet mask (wireless) (P127)
- DHCP (P139)
- IP address (P139)
- Subnet mask (P139)
- Default gateway (P139)
If the IP address (wireless) is set to "192.168.253.254" when
initialization is carried out, the IP address (wireless) will be
initialized to "192.168.254.253".
127
Menu Description
Function
Function