Canon WUX500ST User Manual page 141

Setting Up Email [Mail]
From [Mail] in the settings screen, you can set the items necessary to send error
mails and test mails. For the setting procedure, refer to "Network Setting" (P135).
Item
To:
Cc:
From:
SMTP server IP address
SMTP server port
number
SNTP server IP address
Time zone
Mail resend interval*
Mail resend times
Error report
* When the interval is set to 0 seconds, repeated attempts to send mail are made
(as set in [Mail resend times]) without pausing between attempts.
Explanation
Enter the recipient address for error mails
in 1-byte alphanumeric characters and
symbols (1 - 63 characters).
Enter the CC address for error mails in 1-
byte alphanumeric characters and symbols
(1 - 63 characters).
Enter the sender address for error mails
in 1-byte alphanumeric characters and
symbols (1 - 63 characters).
Enter the SMTP server IP address in 1-
byte numbers.
Enter the SMTP server port number in 1-
byte numbers (1 - 65535).
Enter the SNTP server IP address in 1-
byte numbers.
Select the time zone where the
projector is used.
Enter the interval for resending mail
when an error occurred (unit: seconds)
within the range of 0 - 59 seconds using
1-byte numbers.
Enter the number of times to resend
mail when an error occurred within the
range of 0 - 255 using 1-byte numbers.
Select whether to turn the error mail
sending function on or off.
141
Menu Description
Factory default setting
MailUserAccount
<Blank>
Projector@canon.co.jp
0.0.0.0
25
0.0.0.0
(GMT) Dublin, Lisbon,
London
10
3
OFF