Canon WUX500ST User Manual page 138

Menu Description
Basic Wired Network Settings [Wired]
From [Wired] on the settings screen, you can complete basic network information
for wired connections. For the setting procedure, refer to "Network Setting" (P135).
Item
MAC address
DHCP
IP address
Subnet mask
Default gateway
If settings related to TCP/IP were changed, it is necessary to disconnect and reconnect to
the network.
If the network subnet mask was changed, select [Subnet mask] in the above screen and
set the new subnet mask.
Explanation
Shows the projector's wired MAC
address.
Select whether to turn the DHCP
function on or off for wired connections.
The following settings cannot be
configured manually when this setting is
[ON], because the IP address is
acquired from the server.
[IP address]
[Subnet mask]
[Default gateway]
Enter the projector's wired IP address in
1-byte numbers.
Enter the wired subnet mask in 1-byte
numbers.
Enter the wired default gateway IP
address in 1-byte numbers.
138
Factory default setting
The projector's wired
MAC address
OFF
192.168.254.254
255.255.255.0
0.0.0.0