Ceiling Mounting Or Rear Projection; Mounting The Projector On The Ceiling - Canon WUX500ST User Manual

Installation Procedure
Removing hole caps labeled (2)
Open the lamp cover and use a screwdriver or similar tool to
push off the caps from below.
• Keep the caps in a safe place to avoid losing them.
• The option feet can be used in conjunction with the adjustable feet. When changing the
projection position with adjustable feet, you can make the projector more stable by attaching
option feet to the two holes toward the back of the bottom surface.

■ Ceiling Mounting or Rear Projection

You can mount the projector on the ceiling (ceiling mounting) with it turned upside
down or place it behind the screen (rear projection) if you use a translucent screen.
Ceiling mounting
Make sure to use the optional ceiling attachment. For the ceiling attachment, refer
to "Option" (P201). For details, refer to the assembly and installation manual
provided with the ceiling attachment.

Mounting the Projector on the Ceiling

You can mount the projector on the ceiling.
The ceiling attachment (part No.: RS-CL16)
is required in order to mount the projector on
the ceiling. Depending on the installation
environment, an extension pipe
(part No.: RS-CL08 or RS-CL09) may also
be required. Contact the Canon Customer
Support Center for more detailed
information.
• Make sure to use the optional ceiling attachment.
• You should never install the ceiling attachment by yourself.
If you mount the projector on the ceiling, you have to invert the projected image by
selecting [Image flip H/V] from the menu. (P94)
Rear projection
40
Hole cap