Key Lock - Canon WUX500ST User Manual

Projector on
Select a logo to show after startup while the projector is warming up.
Option
Skip Project input signals immediately after startup.
Canon logo Displays the Canon logo that was registered in advance at the factory.
User logo The user logo is projected.
Interface settings
> [System settings] >
Specify interface details such as settings for input signals of connected equipment.
Key repeat
Key repeat enables projector or remote control buttons to be held down instead of pressing
them repeatedly.
Option
Off
On

Key lock

Lock the projector to prevent direct or remote control operation.
Option
Off
Main unit
Remote (wireless)
[Interface settings]
Key repeat is not enabled.
Key repeat is enabled.
Disables the key lock.
Operation is not possible using the main unit.
Use the remote control.
Disables infrared remote control operations (P36). Use buttons on the
main unit.
Operation is also possible with an optional wired remote control (RS-
RC05).
105
Menu Description
Function
Function
Function