Canon WUX500ST User Manual page 123

Detailed settings (wired)
> [Network settings] >
Display and manually change the wired IP address, gateway address, and other
settings. Available only when wired networking is [On].
Menu
IP address Wired IP address of the projector.
Gateway address Wired gateway address of the projector.
MAC address Wired MAC address of the projector.
DHCP
Change or specify the IP address, subnet mask, and gateway address
used for connections.
TCP/IP settings
[Detailed settings (wired)]
Option
Disables the DHCP function. TCP/IP settings can be
Off
configured.
Enables the DHCP function. Searches the DHCP
server. It will no longer be possible to enter TCP/IP
On settings (IP address, subnet mask, and gateway
address), because the IP address is acquired from the
DHCP server.
• Not required when [DHCP] is [On].
• If an invalid value is entered, the message "Invalid entry"
appears. If this occurs, enter a valid value.
• When [Network (wired/wireless)] is set to [On/On (Pj AP)],
"Cannot set identical segment IP" is displayed if you specify
the same subnetwork as in PJ AP mode. Change the setting
to a different subnetwork, or change [Network (wired/
wireless)] to [On/Off] before entering the wired IP address
again.
123
Menu Description
Function
Function