Controlling The Projector Remotely Through A Web Browser (E-Control®) - Canon LX-MU500Z User Manual

Controlling the projector remotely through a
web browser (e-Control
With a proper LAN cable connection and LAN Control settings, you can operate the projector
from a computer using a web browser or PJLink application when the computer and the
projector are connected to the same local area network.
Recommended operating systems: Windows7/8.1/10, Mac OS X v10.4/10.5/10.6/10.7/10.11.
1. Enter the address of the projector in the address bar of your browser and press Enter.
Recommended web browsers: IE11, Chrome v55.0 / 56.0 / 57.0 3/ 64.0.3282, Firefox v50.0 /
51.0 / 52.0, Safari v8.0 / 9.0 / 10.0.
2. The remote network operation page is displayed. This page allows you to operate the
projector as if you were using the remote control or control panel on the projector.
• Main page
i. These buttons function the same as the ones on the OSD menus, projector or remote
control. See "Projector & Remote control" on page 25
for details.
ii. To switch input source, click on your desired signal.
When you use the projector control panel or remote control to change the OSD menu settings, it
may take a while for the web browser to synchronize these changes with the projector.
52 Controlling the projector remotely
i
i
®
)
ii
and "Menu operation" on page 39
i