Controlling The Projector From A Computer - Canon WUX7000Z User Manual

Connection Procedure

Controlling the Projector from a Computer

The projector can be controlled from a computer over a wired or wireless network
connection.
1
Turn on the computer and projector.
2
Launch a web browser, enter "http://(projector IP address)" in the
address bar, and press the Enter key.
The projector web screen appears.
The factory default IP address is "192.168.254.254" for wired connections and
"192.168.253.254" for wireless connections. If DHCP settings are used, ask the network
administrator for the projector IP address. It is possible to check the IP address from the
projector menu (P185).
3
Click [Projector control] on the web screen.
The password input window appears.
4
Enter the user name and password on the password input window, then
click [OK].
The factory default user name is "root" and the password is "system".
The projector control screen appears.
The projector can be controlled from this screen.
97