Prohibiting Projector Operation [Key Lock]; Registering A Password [Register Password] - Canon SX20 User Manual

Prohibiting
Projector Operation
You can prohibit use of the buttons on the
top control and remote control to prevent
buttons from being pressed by mistake.
System settings
Key lock
The key lock function is not
Off
used.
Use of the top control is
Main unit
prohibited.
Use of the remote control is
Remote control
prohibited.
• The key lock function becomes
effective from the moment the
[OK] button is pressed after
selecting [Main unit] or [Remote
control]. Be sure to press the [OK]
button on the top control or
remote control
locked.
• To unlock buttons forcibly, remove
the power plug from the AC outlet
after completion of projection, and
then insert the power plug with
the [OK] button pressed.
which is not
Registering a
Password
Register a password that you need to
enter when turning on the projector.
System settings
Register password
Press the [OK] button and
OK
the password entry screen
will appear.
Enter a 4-digit password using [^], [>], [v],
and [<] buttons.
Pressing the [^] button enters 1, pressing
the [>] button enters 2, pressing the [v]
button enters 3, and pressing the [<]
button enters 4.
Enter digits starting with the leftmost digit.
When you finish entering four digits, the
password will be registered automatically.
When you want to cancel registering
the password, press the [MENU]
button without
password.
entering the
71