Prohibiting The Projector Operation; Enabling/Disabling The Guide Message; Key Lock - Canon SX6 User Manual

Prohibiting the Projector Operation

[Key lock]

DIGITAL PC
DIGITAL VIDEO
You can prohibit the use of the buttons on the
top control or remote control to prevent them
from being pressed by mistake.
System settings
Disables the key lock function.
Off
Prohibits the use of the top control.
Main unit
Prohibits the use of the remote con-
Remote control
trol.
Press the [OK] button to confirm, and then press
the [MENU] button.
The key lock function becomes effec-
tive from the moment when the [OK]
button is pressed after selecting [Main
unit] or [Remote control]. Be sure to
press the [OK] button on the top con-
trol or remote control which is not
locked.
To unlock the key lock function forc-
ibly, remove the power plug from the
AC outlet after the projection, and
then insert the power plug while hold-
ing down the [OK] button until the pro-
jector beeps.
110
ANALOG PC
COMP./SCART VIDEO/S-VIDEO
Key lock

Enabling/Disabling the Guide Message

[Guide]
DIGITAL PC
DIGITAL VIDEO COMP./SCART VIDEO/S-VIDEO
You can enable/disable the guide message
showing how to use the projector.
System settings
Guide
Disables the guide message.
Off
Enables the guide message.
On
Press the [OK] button to confirm, and then press
the [MENU] button.
The guide message appears on the
screen when:
- The projector is turned on (P38).
- The projector is turned off (the
[POWER] button is pressed) (P58).
- No input signal is confirmed (P34,
62).
- The invalid button is pressed under
NO SHOW, FREEZE, or D.ZOOM
(P76, 77, 79).
ANALOG PC