I "Tag" Channel Setting - Icom IC-A24E Instruction Manual

I "TAG" channel setting

Memory channels can be specified to be skipped for the
memory channel scans respectively. The "TAG" channel func-
tion is only available during scan operation.
Push
Appears the "TAG" indicator.
Memory channel 15 is
scanned during memory
scan.
q Push [MR•
] to select memory mode.
MW
w Select the desired memory channel to be a "TAG" chan-
nel.
• Push , then push [0•
BANK
BANK number if desired. Push [CLR•
lection mode.
e Push
, then push [9•
TAG
• "TAG" appears.
• Non-"TAG" channels are skipped during scan.
r To cancel the "TAG" setting, repeat above steps.
then
Memory channel 15 is
skipped during scan.
], and rotate [DIAL] to select the
] to exit the BANK se-
DEL
] to set a "TAG."
SCAN OPERATION
5
5
17