Tag" Channel Setting - Icom IC-A24E Instruction Manual

■ "TAG" channel setting
Memory channels can be specified to be skipped for the
memory channel scans respectively. The "TAG" channel
function is only available during the scan operation.
Push
Appears the "TAG" indicator.
Memory channel 15 is
scanned during memory
scan.
q Push [MR•
] to select the memory mode.
MW
w Select the desired memory channel to be a "TAG" chan-
nel.
• Push , then push [0•
BANK
BANK number, if desired. Push [CLR•
lection mode.
e Push
, then push [9•
TAG
• "TAG" appears.
• Non-"TAG" channels are skipped during scan.
r To cancel the "TAG" setting, repeat the above steps.
then
Memory channel 15 is
skipped during scan.
], and rotate [DIAL] to select the
] to exit the BANK se-
DEL
] to set a "TAG."
SCAN OPERATION
5
5
17