Guide Bar And Saw Chain Combinations; Saw Chain Filing And File Gauges; Ec Declaration Of Conformity - Husqvarna 418 EL Operator's Manual

Guide bar and saw chain combinations

The following cutting attachments are approved for the models Husqvarna 418 EL and 420 EL.
Guide bar
Model
Length, cm/
inch
418 EL 14 (35)
420 EL 16 (40)
Saw chain filing and file gauges
inch/mm
37 5 5 /32 / 4,0

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel:+46-36-146500, declares under sole responsibility that the corded
electric chainsaws 418 EL and 420 EL from 2016's serial numbers and onwards (the year is clearly stated in plain text
on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S
DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
- of June 8, 2011 on the "restriction of use of certain hazardous substances" 2011/65/EU.
The following standards have been applied:
EN 60745-1:2009 + A11:2010, EN 60745-2-13:2009 + A1:2010, EN 55014-1:2006 + A1:2009 + A2:2011, EN 55014-
2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013
Notified body:
NB2140, DEKRA Testing and Certification Gmbh, Enderstraße 92b, 01277 Dresden, Germany, has carried out EC
type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates for EC
type examination in accordance with annex IX, have the numbers: 4815039.16001-1
For information relating to noise emissions, see the Technical data chapter.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 1 September 2016
Lars Roos, Development manager
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
TECHNICAL DATA
Pitch, inch Gauge, mm
3/8 1,3
80 30
o o
Max. nose
radius
7T
inch/mm
5796536-01
0 0 0 .025 / 0,65
o
Saw chain
Length, drive
Type
links (no.)
52
Husqvarna H37
56
English – 121