Guide bar and saw chain combinations
The following cutting attachments are type approved for the models Husqvarna 120 and 125.
Saw chain filing and file gauges
EC Declaration of Conformity
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service Husqvarna 120,125 from 2017's serial numbers and onwards (the year is clearly stated in
plain text on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
Conformity assessment procedure according to Annex V of the above directive has been used.
For information relating to noise emissions, see the Technical data chapter. The following standards have been applied:
EN ISO 11681-1:2011, EN ISO 14982:2009,CISPR 12:2013
Notified body: TÜV Rheinland LGA Products GmbH, Tillystrasse 2, D-90431 Nuernberg, Germany, 0197, has carried out
EC type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificate for
EC type examination in accordance with annex IX, has the number: The certificates for EC type examination in
accordance with annex IX, have the numbers: BM 50387999
The supplied chain saw conforms to the example that underwent EC type examination.
Husqvarna AB, Huskvarna, Sweden, 2017-09-08
Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
H37 52DL X
H37 56DL X
H37 62DL X
0.025 / 0,65
English – 29