When Moving The Unit; Procedures From Preparing To Move Through Reinstalling; Through Reinstalling - Roland VersaUV LEF-20 Master Manual

When Moving the Unit

Procedures from Preparing to Move Through Reinstalling

To move the machine, you must completely drain all ink inside the machine and secure the print heads in
place with packing materials to protect them. Attempting to move the machine without first doing this may
result in damage to internal components due to leaking ink or damage to the heads.
This operation requires six unused SOL INK cleaning cartridges (four for cleaning and two for refilling ink).
Have these on hand before you start.
Important Notes on Moving
• Be sure to use SOL INK cleaning cartridges. Use of any other type may result in breakdown.
• Once the preparations for moving are complete, move the machine and fill it with ink with as little delay as
possible. Allowing the machine to stand without ink may damage the print heads.
• When moving the machine, keep it at a temperature between 5 to 40˚C (41 to 104˚F) and at relative
humidity between 20 to 80% (with no condensation). Failure to do so may result in breakdown.
• Handle the machine with care when moving, keeping it level (not tilted at an angle) and preventing it from
striking other objects.
• For transportation of this machine, please contact us or your authorized Roland DG Corp. dealer.
Procedure
Prepare
SOL INK cleaning cartridge (6)
1.
Clean print heads .
" "Cleaning All Print Heads" (p. 44)
2.
If the drain bottle and panel cover are detached, put them on .
3.
Remove the stored retainers .
Inside
Retainer A
Screws
52 Chapter 2 Maintenance
Retainer B