Cleaning Mode; Maintenance Cleaning - Roland VersaUV LEF-20 Master Manual

About Maintenance
Important Notes on This Procedure
• For manual cleaning, the cleaning liquid
included, the
commercially available glass cleaner are
necessary. Please prepare them in advance.
• Before performing this operation, remove
any media.
• To prevent the heads from drying out,
finish this procedure in 10 minutes or less. A
warning beep sounds after 10 minutes.
• Never use any implement other than the
included cleaning stick. Cotton swabs or
other lintproducing items may damage
the heads. If you use up the cleaning stick,
purchase a new one from your authorized
Roland DG Corp. dealer.
• Use one cleaning stick per cleaning session.
Reusing cleaning sticks may reduce print
quality.
• Do not put a cleaning stick that has been
used for cleaning into the cleaning liquid. It
may deteriorate the fluid.
• Never rub the nozzle surface of the heads.
• Stroke the sponges very gently, applying as
little pressure as possible. Never rub, scrape,
or crush them.
When a warning beep sounds
during cleaning
A warning beep sounds 10 minutes after
operation begins. Stop work and close the
front cover. And then, press [ENTER] to quit
the manual cleaning menu. After that, restart
the procedure from the beginning.
CAUTION
36 Chapter 2 Maintenance
cleaning stick, and
Be sure to perform
operations as specified in
the instructions above, and
never touch any area not
specified in the instructions .
Sudden movement of the
machine may cause injury.
1 . Change to the Print-Head Manual-

Cleaning Mode

a
NOTE
Be sure to hold the handle of the front cover,
open and close it gently.
1.
Remove any media . Close the front cover .
2.
Press [MENU] .
3.
Press [ ] to display the figure on the below .
MENU
SUB MENU
4.
Press [
SUB MENU
MAINTENANCE
5.
Press [
MAINTENANCE
CLEANING
6.
Press [ENTER] .
NOW PROCESSING..
The print-head carriage moves, and then the
screen shown in the figure appears.
OPEN FRONT
7.
Open the front cover .
FINISHED?
] [ ] in this order .
] .
COVER