Deactivating The Sleep Mode (Power Saving Function); Returning All Settings To Factory Defaults; Deactivating The Sleep Mode; Function) - Roland VersaUV LEF-20 Master Manual

Making Setting of This Machine

Deactivating the Sleep Mode

(Power Saving Function)
The machine goes into the sleep mode when
no operation is performed for a certain period
of time. Meanwhile, you can disable the sleep
mode.
Procedure
1.
Press [MENU] .
2.
Press [ ] to display the figure on the below .
MENU
SUB MENU
3.
Press [ ] .
4.
Press [ ] several times until the screen
shown on the below appears .
SUB MENU
SLEEP
5.
Press [ ] [ ] in this order .
ｽﾘｰﾌﾟ
せってい
6.
Press [ ] .
SETTING
ENABLE DISABLE
7.
Press [ ] [ ] to select "DISABLE . "
SETTING
ENABLE
(Default settings)
DISABLE
8.
Press [ENTER] .
9.
Press [MENU] [
the original screen .
24 Chapter 1 Fully Utilizing the Machine
Explanation
The sleep mode is activated in a
certain period of time.
The sleep mode is not activated.
] in this order to return to
Returning All Settings to
Factory Defaults
This menu returns all settings to the same as
their factory defaults. However, the settings
for "MENU LANGUAGE, " "LENGTH UNIT, " and
"TEMP. UNIT" are not returned to the factory
defaults.
Procedure
1.
Press [MENU] .
2.
Press [ ] to display the figure on the below .
MENU
SUB MENU
3.
Press [ ] .
4.
Press [ ] several times until the screen
shown on the below appears .
SUB MENU
FACTORY DEFAULT
5.
Press [ENTER] .
SETUP MEDIA