Digital Counters; Selector Switches - GE M60 UR Series Instruction Manual

6.2 STATUS
a) STATISTICS
PATH: ACTUAL VALUES
 REMOTE DEVICE

Statistical data (two types) for up to 16 programmed remote devices is shown here.
The number is obtained from the indicated remote device and increments whenever a change of state of at least
STNUM
one item occurs in the GSSE/GOOSE message. The
increments whenever a GSSE/GOOSE message, without a state change, is sent. When the GSSE/GOOSE message
trasmits a state change, the
mented.
PATH: ACTUAL VALUES
 DIGITAL COUNTERS
 Counter 1
The present status of the eight digital counters is shown here. The status of each counter, with the user-defined counter
6
name, includes the accumulated and frozen counts (the count units label will also appear). Also included, is the date and
time stamp for the frozen count. The
PATH: ACTUAL VALUES
 SELECTOR SWITCHES

The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.
6-8
 
STATUS REMOTE DEVICES STATISTICS
1 REMOTE DEVICE
StNum:
REMOTE DEVICE
MESSAGE
SqNum:
resets to 0. This number rolls over to zero when a count of 4,294,967,295 is incre-
SQNUM
 
STATUS

DIGITAL COUNTERS

Counter 1
Counter 1
MESSAGE
Counter 1
MESSAGE
YYYY/MM/DD HH:MM:SS
Counter 1
MESSAGE
COUNTER 1 MICROS
 
STATUS

SELECTOR SWITCHES

SELECTOR SWITCH 1
POSITION: 0/7
SELECTOR SWITCH 2
MESSAGE
POSITION: 0/7
M60 Motor Protection System

REMOTE DEVICE
1
0
1
0
number is obtained from the indicated remote device and
SQNUM

DIGITAL COUNTERS Counter 1(8)
ACCUM:
0
FROZEN:
0
FROZEN:
MICROS:
0
value refers to the microsecond portion of the time stamp.
Range: Current Position / 7
Range: Current Position / 7
6 ACTUAL VALUES
1(16)
6.2.10 DIGITAL COUNTERS
6.2.11 SELECTOR SWITCHES
GE Multilin