Remote Inputs; Remote Double-Point Status Inputs - GE M60 UR Series Instruction Manual

6 ACTUAL VALUES

PATH: ACTUAL VALUES STATUS
 VIRTUAL INPUTS

MESSAGE
MESSAGE
The present status of the 64 virtual inputs is shown here. The first line of a message display indicates the ID of the virtual
input. For example, 'Virt Ip 1' refers to the virtual input in terms of the default name. The second line of the display indicates
the logic state of the virtual input.

PATH: ACTUAL VALUES STATUS
 REMOTE INPUTS

MESSAGE
MESSAGE
The present state of the 32 remote inputs is shown here.
The state displayed will be that of the remote point unless the remote device has been established to be "Offline" in which
case the value shown is the programmed default state for the remote input.

PATH: ACTUAL VALUES STATUS
 REMOTE DPS INPUTS

MESSAGE
MESSAGE
The present state of the remote double-point status inputs is shown here. The actual values indicate if the remote double-
point status inputs are in the on (close), off (open), intermediate, or bad state.
GE Multilin

VIRTUAL INPUTS
Virt Ip 1
Off
Virt Ip 2
Off

Virt Ip 64
Off


REMOTE INPUTS

REMOTE INPUT 1
STATUS: Off
REMOTE INPUT 2
STATUS: Off

REMOTE INPUT 32
STATUS: Off

REMOTE DPS INPUTS
REMOTE DPS INPUT
STATUS: Bad
REMOTE DPS INPUT
STATUS: Bad

REMOTE DPS INPUT
STATUS: Bad
M60 Motor Protection System
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off
Range: On, Off

6.2.5 REMOTE DOUBLE-POINT STATUS INPUTS

Range: On, Off, Intermediate, Bad
1
Range: On, Off, Intermediate, Bad
2
Range: On, Off, Intermediate, Bad
5
6.2 STATUS
6.2.3 VIRTUAL INPUTS
6.2.4 REMOTE INPUTS
6
6-5