GE M60 UR Series Instruction Manual page 156

5.2 PRODUCT SETUP 5 SETTINGS
IP3/Mask3: 10.3.1.2/255.0.0.0
This example is incorrect because the mask of 255.0.0.0 used for the three IP addresses makes them belong to the same
network of 10.x.x.x.
Single LAN, No Redundancy
The topology shown in the following figure allows communications to SCADA, local configuration/monitoring through
EnerVista, and access to the public network shared on the same LAN. No redundancy is provided.
Figure 5–5: NETWORK CONFIGURATION FOR SINGLE LAN
5
5-28 M60 Motor Protection System GE Multilin