GE M60 UR Series Instruction Manual page 84

3.3 DIRECT INPUT/OUTPUT COMMUNICATIONS
3
Figure 3–27: DIRECT INPUT AND OUTPUT SINGLE/DUAL CHANNEL COMBINATION CONNECTION
The interconnection requirements are described in further detail in this section for each specific variation of type 7 commu-
nications module. These modules are listed in the following table. All fiber modules use ST type connectors.
Not all the direct input and output communications modules are applicable to the M60 relay. See the order codes
tables in chapter 2 for the applicable options.
NOTE
Table 3–3: CHANNEL COMMUNICATION OPTIONS (Sheet 1 of 2)
MODULE SPECIFICATION
2A C37.94SM, 1300 nm, single-mode, ELED, 1 channel single-mode
2B C37.94SM, 1300 nm, single-mode, ELED, 2 channel single-mode
2E Bi-phase, 1 channel
2F Bi-phase, 2 channels
2G IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 channel
2H IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 channels
2I Channel 1 - IEEE C37.94 MM, 64/128 kbps; Channel 2 - 1300 nm, single-mode
2J Channel 1 - IEEE C37.94 MM, 64/128 kbps; Channel 2 - 1550 nm, single-mode
72 1550 nm, single-mode, laser, 1 channel
73 1550 nm, single-mode, laser, 2 channels
74 Channel 1 - RS422; channel 2 - 1550 nm, single-mode, laser
75 Channel 1 - G.703; channel 2 - 1550 nm, single-mode, laser
76 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 1 channel
77 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 channels
7A 820 nm, multimode, LED, 1 channel
7B 1300 nm, multimode, LED, 1 channel
7C 1300 nm, single-mode, ELED, 1 channel
7D 1300 nm, single-mode, laser, 1 channel
7E Channel 1: G.703, Channel 2: 820 nm, multimode
7F Channel 1: G.703, Channel 2: 1300 nm, multimode
7G Channel 1: G.703, Channel 2: 1300 nm, single-mode ELED
7H 820 nm, multimode, LED, 2 channels
7I 1300 nm, multimode, LED, 2 channels
7J 1300 nm, single-mode, ELED, 2 channels
7K 1300 nm, single-mode, LASER, 2 channels
7L Channel 1: RS422, channel: 820 nm, multimode, LED
7M Channel 1: RS422, channel 2: 1300 nm, multimode, LED
3-26 M60 Motor Protection System
3 HARDWARE
GE Multilin