Communications - GE M60 UR Series Instruction Manual

5.2 PRODUCT SETUP
a) MAIN MENU

PATH: SETTINGS PRODUCT SETUP
 COMMUNICATIONS

5
b) SERIAL PORTS
The M60 is equipped with up to two independent serial communication ports. The faceplate RS232 port is intended for local
use and is fixed at 19200 baud and no parity. The rear COM2 port be used for either RS485 or RRTD communications.
5-26


COMMUNICATIONS

 SERIAL PORTS

 NETWORK
MESSAGE

 ROUTING
MESSAGE

 MODBUS PROTOCOL
MESSAGE

PROTOCOL:
MESSAGE
DNP 3.0
 DNP PROTOCOL
MESSAGE

 DNP / IEC104
MESSAGE
 POINT LISTS
 IEC 61850 PROTOCOL
MESSAGE

 WEB SERVER
MESSAGE
 HTTP PROTOCOL
 TFTP PROTOCOL
MESSAGE

 IEC 60870-5-104
MESSAGE
 PROTOCOL
 EGD PROTOCOL
MESSAGE

 IEC103
MESSAGE
 PROTOCOL
M60 Motor Protection System
5.2.4 COMMUNICATIONS
See page 5–26.
See page 5–30.
See page 5–32.
See page 5–34.
Range: DNP 3.0, IEC 60870-5-104, IEC 60870-5-103
See page 5–36.
See page 5–39.
See page 5–40.
See page 5–55.
See page 5–55.
See page 5–56.
See page 5–57.
See page 5–59.
5 SETTINGS
GE Multilin