Interfaces (Sflow Monitoring Technology) - Juniper EX9200 Features Manual

interfaces (sFlow Monitoring Technology)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
interfaces interface-name {
polling-interval seconds;
sample-rate {
egress number;
ingress number;
}
}
[edit protocols sflow]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Configure sFlow network traffic monitoring on the specified interface on the switch. You
can configure sFlow parameters such as polling interval and sampling rate with different
values on different interfaces, and you can also disable sFlow monitoring on individual
interfaces.
The remaining statements are explained separately.
—Name of the interface on which to configure sFlow parameters.
interface-name
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring sFlow Technology to Monitor Network Traffic on EX Series
Switches on page 27
Configuring sFlow Technology for Network Monitoring (CLI Procedure) on page 26
Chapter 6: Configuration Statements: sFlow Technology
71