Remote-Loopback; Send-Critical-Event - Juniper EX9200 Features Manual

remote-loopback

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

send-critical-event

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
Chapter 5: Configuration Statements: Ethernet OAM Link Fault Management
remote-loopback;
[edit protocols oam link-fault-management interface
Statement introduced in Junos OS Release 8.2.
For Ethernet interfaces on EX Series switches and M320, M120, MX Series, and T Series
routers, set the remote DTE into loopback mode. Remove the statement from the
configuration to take the remote DTE out of loopback mode. Used for IEEE 802.3ah
Operation, Administration, and Management (OAM) support.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Setting a Remote Interface into Loopback Mode on page 11
send-critical-event;
[edit protocols oam ethernet link-fault-management action-profile
Statement introduced in Junos OS Release 8.5.
Send OAM PDUs with the critical event bit set.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Specifying the Actions to Be Taken for Link-Fault Management Events on page 19
interface-name]
action]
65