Monitor Traffic - Juniper EX9200 Features Manual

Network Management and Monitoring Feature Guide for EX9200 Switches

monitor traffic

Syntax
Release Information
Description
Options
82
monitor traffic
<brief | detail | extensive>
<absolute-sequence>
<count count>
<interface interface-name>
<layer2-headers>
<matching matching>
<no-domain-names>
<no-promiscuous>
<no-resolve>
<no-timestamp>
<print-ascii>
<print-hex>
<resolve-timeout>
<size size>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Command introduced in Junos OS Release 14.1X53-D20 for the OCX Series.
Display packet headers or packets received and sent from the Routing Engine.
NOTE:
Using the monitor-traffic
performance.
Delays from DNS resolution can be eliminated by using the
option.
NOTE: This command is not supported on the QFabric system.
none —(Optional) Display packet headers transmitted through
router, display packet headers transmitted through
—(Optional) Display the specified level of output.
brief | detail | extensive
—(Optional) Display absolute TCP sequence numbers.
absolute-sequence
count count —(Optional) Specify the number of packet headers to display (0 through
1,000,000). The monitor traffic command quits automatically after displaying the
number of packets specified.
command can degrade router or switch
fxp0
.
em0
Copyright © 2016, Juniper Networks, Inc.
no-resolve
. On a TX Matrix Plus