Link-Fault-Management - Juniper EX9200 Features Manual

link-fault-management

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Copyright © 2016, Juniper Networks, Inc.
Chapter 5: Configuration Statements: Ethernet OAM Link Fault Management
link-fault-management {
action-profile profile-name {
action {
link-down;
send-critical-event;
syslog;
}
event {
link-adjacency-loss;
link-event-rate {
frame-error count;
frame-period count;
frame-period-summary
symbol-period count;
}
protocol-down;
}
}
interface interface-name {
apply-action-profile profile-name;
link-discovery (active | passive);
loopback-tracking;
pdu-interval interval;
pdu-threshold threshold-value;
remote-loopback;
event-thresholds {
frame-error count;
frame-period count;
frame-period-summary
symbol-period count;
}
negotiation-options {
allow-remote-loopback;
no-allow-link-events;
}
}
}
[edit protocols oam ethernet]
Statement introduced in Junos OS Release 8.2.
For Ethernet interfaces on M320, M120, MX Series, and T Series routers and EX Series
switches, specify fault signaling and detection for IEEE 802.3ah Operation, Administration,
and Management (OAM) support.
The remaining statements are explained separately.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
count;
count;
45