Link-To-Monitor - Juniper EX9200 Features Manual

link-to-monitor

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2016, Juniper Networks, Inc.
link-to-monitor interface-name;
[edit protocols uplink-failure-detection group group-name]
Statement introduced in Junos OS Release 11.1 for EX Series switches.
Configure the uplink interfaces to be monitored for uplink failure detection. The switch
can monitor a maximum of 48 uplink interfaces in a group.
An interface can be configured as link-to-monitor in multiple groups.
—Name of the uplink interface or interface range in the group. The interface
interface-name
can be a physical interface or a logical interface.
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Configuring Interfaces for Uplink Failure Detection (CLI Procedure) on page 35
Chapter 7: Configuration Statements: Uplink Failure Detection
77