Mounting The Engine - Seagull Models SEA278 Assembly Manual

Messerschmitt Bf 109E 60
2) Use four 4x30mm head bolts and four
4mm washers to attach the engine mount
rails to the firewall. Tighten the screws .
Make sure to use threadlock on the screws to
help prevent them from vibrating loose.
Thread locker glue.

MOUNTING THE ENGINE.

1) Position the engine with the drive
washer (145mm) forward of the firewall
as shown.
16
Instruction Manual.
145mm
2) Use a pin drill and 4mm drill bit to
drill a small indentation in the mount for
the engine mounting screw.
4mm
3) Use a drill to drill the four holes in the
engine mount rails.
Machine screw M4x30mm
4mm