Table of Contents
Advertisement
Synchronize Time Zone on Instrument and
Computer
Your instrument's date and time may differ from that of the computer
which receives the recordings, particularly if you are sending recordings
to a country or region in a different time zone. You can synchronize your
instrument time with that of the host (data recipient) computer by
automatically updating the instrument's date/time each time you
transfer data using Send or Receive.
To use this feature, the receiving computer must have Synchronize VB
Date and Time with the PC switched on.
MORE: See the
To synchronize the time zone on your instrument and computer:
1.
Open the main menu.
2.
Press
twice.
3.
Press
Ascent Time Sync to toggle the setting — The following
options are available:
Auto — Synchronize the date and time whenever data is
•
transferred.
Off — Do NOT synchronize the date and time. The instrument
•
will continue to use the date and time settings you have
specified manually.
Manual — Synchronize the date and time only if the time zone is
•
different or your instrument time differs from your computer by
more than one minute. If you select Manual. You will be
prompted to update your instrument date/time. When this
happens, press
the instrument's existing date/time settings.
Section 8 — Send and Receive Information
Ascent Reference
to synchronize the time or
156
Guide.
to keep
Advertisement
Table of Contents
