Upgrade Instrument Firmware — Proflash
We will periodically release new versions of instrument firmware. These
upgrades enable you to take advantage of product enhancements and
new features that were created after your instrument was purchased. To
reprogram an instrument with newer firmware you must PROFLASH the
instrument with a new firmware file.
WARNING! Proflashing will restore the instrument to the factory
default state and delete all stored information. This includes
folders, routes, machines, parameter sets, recordings and balance
jobs. If you wish to save any of this information, please transfer all
folders to the software before Proflashing your instrument.
To check if a newer firmware version is available, visit
http://www.commtest.com/what_s_new/product_releases. Firmware
files are included with Ascent, and not typically provided individually.
Update your version of Ascent to access newer instrument firmware.
Section 13 — General Setup Options
261