Change Sensor Temporarily
To temporarily switch to using a different sensor:
1.
Open the Measurement Setup screen.
2.
Select the type of measurement you wish to take.
3.
Press
> Press
Change Default Sensor
To change the default sensor:
1.
Press
Options on the main menu.
2.
Press
Sensor Setup > Press Change Sensor beside your
chosen measuring channel.
3.
Press
Select as Default to select the sensor you wish to use for
the schedule entries sent from Ascent.
Delete Sensor
If required you can remove a sensor from your machine. To do this:
1.
Press
Options on the main menu.
2.
Press
Sensor Setup > Press Change Sensor beside your
chosen measuring channel.
3.
Use the arrow keys on the left to select the required sensor.
4.
Press
Delete Sensor.
Notes
You can create, view, attach, edit, and remove notes.
Section 10 — Create, Edit, and Delete Items
.
209