Charge Battery Pack - GE SCOUT100-Ex Reference Manual

Charge Battery Pack

To charge your battery pack:
1. Ensure the power adapter you are using is suitable (i.e. 12 Volt, 3
Amp output, center positive).
NOTE: The power adapter supplied with your instrument has the
correct DC voltage.
2. Connect the AC power adapter included with your instrument to a
powered outlet (100-240 Volt, 50/60 Hz).
NOTE: You can also use the optional car adapter charging lead to
charge the battery pack in a vehicle with a 12 V negative-chassis
power system.
3. Connect the adapter's DC output to your instrument's charger
power socket — The instrument's Power Supply and Charging LED
indicators illuminate to indicate that the instrument is charging.
NOTE: The battery will be fully charged in approximately 3 hours.
NOTE: Ensure you charge the fast-charge Lithium Ion battery pack
for at least 1 hour before or during its initial use.
Section 1 — Introduction
14