Show or Hide Harmonics
To hide or show harmonics:
1.
Press
> Press
2.
Repeat the previous step to cycle between harmonic, harmonic &
sideband cursors, and normal cursors — The selected cursor type is
identified by a brief message on your screen.
3.
Press
or
peaks — Additional cursors will display as whole-number multiples
of the frequency or time value indicated by the main cursor.
4.
Press
> Press
sidebands.
Section 7 — Analyzing Measurements Onsite
Harmonics Sidebands.
repeatedly to move the cursor over different
Clear Cursors to remove all harmonics and
138