Change Default Measurement Settings
To change the default settings for a measurement option:
1.
Press a key on the right beside a setting you wish to change.
2.
Press
> Press a key beside a setting you wish to change > Enter
a value or select the required value from the list.
3.
Press
to apply your changes and return to the previous menu.
4.
Press
> Press
select a different sensor.
5.
Press the required button on the right to select the required
measuring channel.
6.
Use the arrow keys on the left to highlight the required sensor >
Press
to proceed with your selection.
7.
Press the required button on the right to enable your preferred
measuring channel.
8.
Press
twice to start measuring.
Section 7 — Analyzing Measurements Onsite
to access the Sensor Setup option and
Changing the default measurement settings
133