Instrument Connections - GE SCOUT100-Ex Reference Manual

Instrument Connections

The top panel of the instrument is equipped with the following
connectors:
Label Feature
number
1
Ethernet port
2
USB host port
3
USB socket
4
Charger power socket
(12 Volt 3 Amp input)
5
BNC sensor input
6
BNC sensor input
7
LEMO four-pin
tachometer input
IMPORTANT! Ensure the protective rubber cover is securely
fastened over the instrument communication ports while you
collect data in the field. Failure to do this may void your warranty.
The IP65 rating only applies while the rubber cover is securely
fastened.
Section 1 — Introduction
Top panel
Description
Connects to a standard 8P8C (RJ45)
male plug terminator
Connects to an external USB memory
device for data import and export
MORE: See
External USB Flash
Provides a data connection between
the instrument and an Ascent
software host computer
Enables you to power the instrument
and charge the its battery pack
Channel 1
Channel 2
11
Export/Import Data via an
Drive.